ClearOne V-There 2100 Guia do Utilizador descarregar pdf (Página 19)

2 - 7

To Add an Output Sequence

1. Scan the Enter Sequence symbol (see Require Output

Sequence, page 2-10).

2. Code I.D.

On the Symbology Charts on page A-1, find the symbology to which you

want to apply the output sequence format. Locate the Hex value for that

symbology and scan the 2 digit hex value from the Programming Chart

(inside back cover).

3. Length

Specify what length (up to 9999 characters) of data output will be

acceptable for this symbology. Scan the four digit data length from the

Programming Chart. (Note: 50 characters is entered as 0050. 9999 is

a universal number, indicating all lengths.) When calculating the length,

you must count any programmed prefixes, suffixes, or formatted

characters as part of the length (unless using 9999).

4. Character Match Sequences

On the ISO 2022/ISO 646 Character Replacements, page A-10, find the

Hex value that represents the character(s) you want to match. Use the

Programming Chart to read the alphanumeric combination that

represents the ASCII characters. (99 is the Universal number,

indicating all characters.)

5. End Output Sequence Editor

Scan F F to enter an Output Sequence for an additional symbology, or

Save to save your entries.

Other Programming Selections

• Discard

This exits without saving any Output Sequence changes.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 151 152

Sem comentários

ClearOne V-There 2100 Guia do Utilizador Página 19