ClearOne AP10 Especificações descarregar pdf (Página 12)

Technical or Setup Assistance

Telephone: 800.945.7730 (USA) or 801.975.7200 (worldwide) • http://www.gentner.com

Page 8 Audio Perfect

10 Installation and Operations Manual

Dip Switch 5, Auto-Disconnect

Dip switch 5 behind the AP10’s front access panel enables/disables auto-

disconnect (Table 6, below).

Dip Switch 6, Call Progression/Loop

Dip switch 6 selects either loop drop or call-progress mode. Call-progress mode

will disconnect the line upon detection of a valid call-progress signal (Table 7,

below). Call progress will detect reorder tone and busy for the U.S., Canada,

United Kingdom, France and Germany.

Operational Features

Continued

Table 5. Auto-Answer Dip Switch Settings

Dip Switch Position Description

4 ON (UP) Auto-answer enabled

4* OFF (DOWN) Auto-answer disabled (follows the serial command)

AUTO-ANSWER SERIAL COMMAND NOTE:

To issue the AA (auto-answer) serial command to toggle auto-answer, the dip switch 4 must be OFF (DOWN).

Table 6. Auto-Disconnect Dip Switch Settings

Dip Switch Position Description

5* ON (UP) Auto-disconnect enabled

5 OFF (DOWN) Auto-disconnect disabled

Dip Switch 7, Receive Reduction

In some applications, it may be necessary to duck the receive audio coming in

through the telephone line when transmit audio is present. To serve this purpose,

dip switch 7 is designated to duck the receive audio by -6dB, if active (Table 8,

below).

Dip Switch 8, Hook-Flash Duration

Dip switch 8 selects either a 50 millisecond or 500 millisecond hook-flash duration

(Table 9, below).

AUTO-DISCONNECT NOTE:

In order for the settings on Dip Switch 6 (below) to function, Dip Switch 5 (above) must be ON (UP). Auto-disconnect must

be enabled before either Call Progression or Loop Drop are applicable.

Table 8. Receive Reduction Dip Switch Settings

Dip Switch Position Description

7 ON (UP) Receive reduction enabled

7* OFF (DOWN) Receive reduction disabled

Table 7. Call Progression/Loop Dip Switch Settings

Dip Switch Position Description

6 ON (UP) Call progression enabled

6* OFF (DOWN) Loop drop enabled

Table 9. Hook-Flash Duration Dip Switch Settings

Dip Switch Position Description

8 ON (UP) 50 milliseconds

8* OFF (DOWN) 500 milliseconds

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 29 30

Comentários a estes Manuais

Sem comentários

ClearOne AP10 Especificações Página 12

Comentários a estes Manuais

Manuais e produtos relacionados com Redes ClearOne AP10